Bolleke Repair

REPLACE THE BATTERY

Parts only suitable for Bolleke from batch number 2002846 and newer.

1. Remove the ON-OFF button (use your nails, or carefully insert a small plate head screwdriver/bold knife between the button and the plastic housing).
2. Uncover the silicone cover that protects the charging point.
3. Open the product using the open key delivered in the repair kit (hold the ball shade between your legs and screw the product apart).
4. Pull the white dome 'Light Diffuser' to snap it out (pull in linear direction, don’t bend or twist).
5. Unscrew the board with the led to uncover the battery.
6. Remove the 'Battery' from its compartment and gently pull the cables till unplug it. Plug the new battery in the socket.

REPLACE THE LED

Parts only suitable for Bolleke from batch number 2002846 and newer.

1. Remove the ON-OFF button (use your nails, or carefully insert a small plate head screwdriver/bold knife between the button and the plastic housing).
2. Uncover the silicone cover that protects the charging point.
3. Open the product using the open key delivered in the repair kit (hold the ball shade between your legs and screw the product apart). 
4. Pull the white dome 'Light Diffuser' to snap it out (pull in linear direction, don’t bend or twist).
5. Unscrew the board with the led and gently pull the cables till unplug it. Plug the new led in the socket.

REPLACE THE MAIN ELECTRONIC BOARD

Parts only suitable for Bolleke from batch number 2002846 and newer.

1. Remove the ON-OFF button (use your nails, or carefully insert a small plate head screwdriver/bold knife between the button and the plastic housing).
2. Uncover the silicone cover that protects the charging point.
3. Open the product using the open key delivered in the repair kit (hold the ball shade between your legs and screw the product apart). 
4. Pull the white dome 'Light Diffuser' to snap it out (pull in linear direction, don’t bend or twist).
5. Unscrew the 4 lower screws.
6. Pull the plastic part that holds the electronic components out.
7. Un-snap the main electronic board apart from the plastic housing (its hold in-place by two plastic hooks).
8. Unplug the two cables connected to the board.
9. Replace the board for the new one. 
10. Press the ON-OFF button to control if the product works properly. If the button does not control the light then connect the electric switches the other way around.

REPLACE THE SILICONE ITEMS

Parts only suitable for Bolleke from batch number 2002846 and newer.

1. Remove the ON-OFF button (use your nails, or carefully insert a small plate head screwdriver/bold knife between the button and the plastic housing).
2. Uncover the silicone cover that protects the charging point.
3. Open the product using the open key delivered in the repair kit (hold the ball shade between your legs and screw the product apart). 
4. Pull the white dome 'Light Diffuser' to snap it out (pull in linear direction, don’t bend or twist).
5. Unscrew the 4 lower screws.
6. Pull the plastic part that holds the electronic components out.
7. Force the silicone ribbon to the inside of the product.
8. Remove the small part that locks the ribbon in place.
9. Replace all the silicone components by pressing/pulling them apart.
10. The small part that locks the ribbon has a slot to indicate the right orientation. Pay attention to this while re-assembly the items back.